Media Production Services

AI-generated analysis of the documents. Check the official notice and any amendments for current submission details.

1. At a glance

2. Scope of Work

Department of Further and Higher Education Research Innovation and Science ran this procurement for “Media Production Services” as an operational contract requiring implementation and sustained service execution. The extracted pack showed qualification-stage material with references to later ITT technical depth; practical activity therefore centred on building, integrating, and operating the specified service stack with compliant reporting and handover obligations where stated. Constituent activities and named work elements in the supplied extracts:

• be required to hold for the term of the Services Contract the following insurances: Type of Insurance Indemnity Limit Employer’s Liability €12.7mn Limit for any one claim or series of
• timates that the expenditure on the Services to be covered by the proposed Media Production Services may amount to some €230,000 (excl
• s that the expenditure on the Services to be covered by the proposed Media Production Services may amount to some €230,000 (excl
• rer shall be required to supply its Tax Clearance Access Number and Tax Reference Number to facilitate online verification of their tax status by
• tion (the “Services Contract”) will be issued for a term of 12 months (“the Term”)
• [RFT Media Production Services - Jan 2024.docx] Request for Tenders dated 01/02/2024
• [RFT Media Production Services - Jan 2024.docx] Part 1: Introduction
• [RFT Media Production Services - Jan 2024.docx]
• 1.1 Department of Further and Higher Education, Research, Innovation and Science (the “Contracting Authority”) invites tenders (“Tenders”) to this request for tenders (“RFT”) from economic operators (“Tenderers”) for the provision of the services as described in Appendix 1 to this RFT (the “Services”).
• 1.2 In summary, the Services comprise: Media Production agency to create a 30 minute documentary on the reality of modern day careers in construction aimed at young adults; a short documentary explaining Modern Methods of Construction (MMC) and 20 MMC training videos, aimed at small to medium sized building companies.
• 1.4 This public procurement competition (the “Competition”) will be conducted in accordance with the open procedure under the European Union (Award of Public Authority Contracts) Regulations 2016 (Statutory Instrument 284 of 2016) (the “Regulations”). Any contract that may result from this Competition (the “Services Contract”) will be issued for a term of 12 months (“the Term”).
• 1.6 The Contracting Authority estimates that the expenditure on the Services to be covered by the proposed Media Production Services may amount to some €230,000 (excl. VAT) Non-binding monetary references in the source were treated as context only and were not used as qualification thresholds.

3. Background & buyer context

The buyer context reflected a formal Irish public-procurement route, with pre-qualification used to control entry into the tender stage.

• 1.7 Contracting Authority policy seeks to encourage participation on a fair and equal basis by Small and Medium Enterprises (“SME”s) in this Competition. SMEs that believe the scope of this Competition is beyond their technical or business capacity are encouraged, subject to paragraph 2.5, to explore the possibilities of forming relationships with other SMEs or with larger enterprises. Through such relationships they can participate and contribute to the successful implementation of any Services Contract that may result from this Competition and therefore increase their social and economic benefits. Larger enterprises are also encouraged, subject to paragraph 2.5, to consider the practical ways that SMEs can be included in their proposals to maximise the social and economic benefits of any Services Contracts that may result from this Competition.

4. Eligibility & selection criteria

• Turnover requirement — — use these verbatim for insurance / turnover. If a category (insurance, turnover) has no entry here, treat it as 'not specified' for THIS tender.
• Insurance — — use these verbatim for insurance / turnover. If a category (insurance, turnover) has no entry here, treat it as 'not specified' for THIS tender.; be required to hold for the term of the Services Contract the following insurances: Type of Insurance Indemnity Limit Employer’s Liability €12.7mn Limit for any one claim or series of; Public Liability €6.5mn Limit for any one claim or series of
• Certifications — not specified for this tender
• Past experience — not specified for this tender
• Personnel — not specified for this tender
• Geographic / facility constraints — not specified for this tender Additional binding lines surfaced in the deterministic extract:
• — use these verbatim for insurance / turnover. If a category (insurance, turnover) has no entry here, treat it as 'not specified' for THIS tender.
• be required to hold for the term of the Services Contract the following insurances: Type of Insurance Indemnity Limit Employer’s Liability €12.7mn Limit for any one claim or series of
• Public Liability €6.5mn Limit for any one claim or series of
• claims arising out of a single occurrence, per insurance year Product Liability n/a Professional Indemnity €1mn Limit in the aggregate per insurance

5. Award criteria & scoring

6. Submission requirements

• Method statement / response document (template/page limits) — Appendix 1 questionnaire/PQQ response was required.
• CVs (page count, named roles) — not specified in extract.
• Pricing schedule (format/template) — expected at ITT stage.
• Case studies (number/value range) — client references/comparable project evidence was referenced.
• Declarations (ESPD/Bona Fides/Tax/COI) — ESPD/declaration/statement-of-confirmation language was present.
• Mandatory site visit — not specified in extract.
• Submission portal and formatting — eTenders portal and PDF electronic copies were referenced. Submission-related source lines:
• Appendix 1: Requirements and Specifications
• Appendix 4: Declaration as to Personal Circumstances of Tenderer
• Appendix 6: Confidentiality Agreement
• 1.1 Department of Further and Higher Education, Research, Innovation and Science (the “Contracting Authority”) invites tenders (“Tenders”) to this request for tenders (“RFT”) from economic operators (“Tenderers”) for the provision of the services as described in Appendix 1 to this RFT (the “Services”).
• [RFT Media Production Services - Jan 2024.docx] laws, regulations and guidelines including but not limited to Regulation (EU) 2016/679 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data, and repealing Directive 95/46/EC (the “General Data Protection Regulation”), and any guidelines and codes of practice issued by the Office of the Data Protection Commission or other supervisory authority for data protection in Ireland from time to time. The Contracting Authority will be a Data Controller (where Data Controller has the meaning given under the Data Protection Laws) in respect of any Personal Data (where Personal Data has the meaning given under the Data Protection Laws) required to be provided by the Tenderer in response to this RFT. The Tenderer, as Data Controller in respect of any Personal Data provided by it in its Tender, is required to confirm in the statement required under paragraph 2.4 below that all Data Subjects (where Data Subject has the meaning given under the Data Protection Laws) whose Personal Data is provided by the Tenderer have consented to the processing of such Personal Data by the Tenderer, the Contracting Authority, the Evaluation Team and the supplier of the etenders.gov.ie website, for the purposes of the participation of the Tenderer in this Competition or that the Tenderer otherwise has a legal basis for providing such Personal Data to the Contracting Authority for the purposes of its participation in this Competition.
• (a) To complete and submit with their Tender the electronic version of the European Single Procurement Document (“eESPD”). Tenderers may submit an eESPD which has already been used in a previous procurement procedure PROVIDED THAT they confirm that: (i) the information contained in it continues to be correct and (ii) that they satisfy the Selection Criteria for this Competition as set out at part 3.2 below;

7. Key dates & process

8. Contract terms that matter

Contract duration in the extract: 12 months. Payment cycle, SLA/KPI schedule, and penalty regime were not fully disclosed in the snippets unless listed below.

• VERIFIED PHRASES (deterministic regex extract from the documents — treat as authoritative for numerical claims)
• be required to hold for the term of the Services Contract the following insurances: Type of Insurance Indemnity Limit Employer’s Liability €12.7mn Limit for any one claim or series of
• NOW IT IS HEREBY AGREED in consideration of the sum of €2.00 (the receipt of which is hereby acknowledged by the Contractor) as follows:
• tion (the “Services Contract”) will be issued for a term of 12 months (“the Term”)
• ontinues for 14 calendar days either Party may terminate at 14 days notice
• breach(es) (if the breach(es) are capable of remedy) within 30 days after receipt of a request in writing f
• For the Term and for a period of 12 months thereafter (and save in respect of publ
• for 14 calendar days either Party may terminate at 14 days notice

9. Risks, red flags & unusuals

• Qualification gate: the deterministic extract included a turnover threshold line (— use these verbatim for insurance / turnover. If a category (insurance, turnover) has no entry here, treat it as 'not specified' for THIS tender.), which can materially narrow bidder pool composition.
• The two-step process (PQQ then ITT) shifted effort to compliance evidence early, with competitive scoring detail potentially deferred.
• Technical and contractual granularity appeared ITT-dependent, increasing ambiguity at qualification stage for non-incumbent bidders.

10. SME fit assessment

This competition looked most accessible to firms with established public-sector tender capability, documented financial capacity, and direct operational experience in the relevant service category.

• Credible bidder profile — mid-sized to large specialist with formal QA/compliance process.
• Consortium / sub-contracting — allowed or addressed in the extracts (Appendix references and reliance provisions).
• Indicative bid-prep effort — 6 to 12 working days for evidence collation, form completion, and review cycles at PQQ level.
• Pwin signal — strongest for bidders with reusable qualification artefacts, comparable references, and low-friction mobilisation capability.

11. Where to dig deeper

• Source RFT/PQQ filenames: RFT Media Production Services - Jan 2024.docx, RFT Media Production Services - Jan 2024.docx] Request for Tenders dated 01/02/2024, RFT Media Production Services - Jan 2024.docx] Part 1: Introduction.
• eTenders CFT / notice reference: not specified in extract.
• Clarification contact / portal: eTenders message portal (email not surfaced in extract).
• Key attachments to prioritise: Appendix 1: Requirements and Specifications, Appendix 2: Pricing Schedule, Appendix 3: Tenderer’s Statement.